Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light from the Mercedes Vito?

Model: Mercedes Vito MK 3, W447 - Years 2014-2024
Part: Tail light

To remove the rear light from the Mercedes Vito, open the rear tailgate to access the screws located next to the light cluster: once these screws are loosened, you can detach the light from its housing and disconnect the connectors located at its lower part. After removing the light from its position, you can connect the new one so that it can be inserted into its housing: now secure it with the screws and check that everything functions correctly.

Posted on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Rear Light Bulbs on Mercedes Vito
How to Replace Rear Light Bulbs on Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) These simple steps will show you how to replace the rear light or stop light bulbs on a Mercedes Vito. First, move to the rear and start by undoing t…
Replacing the Rear Light and Bulbs on the Mercedes Vito
Replacing the Rear Light and Bulbs on the Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) In this brief and simple guide, follow the steps to remove and replace the rear light and its bulbs on the Mercedes Vito. First, go to the rear and o…
How to Remove the Bulb from the Rear Light of a Mercedes Vito
How to Remove the Bulb from the Rear Light of a Mercedes Vito
Mercedes Vito (2003-2013 / W639, MK 2) Before you can start, open the rear door of your Mercedes Vito. Begin by unscrewing and removing the screws that secure the rear light to its housing…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos