Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Rear Light Bulbs on Mercedes Vito

Model: Mercedes Vito MK 3, W447 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Tail light bulb

See other generations:
Video tutorial

These simple steps will show you how to replace the rear light or stop light bulbs on a Mercedes Vito. First, move to the rear and start by undoing the side fixing screws of the light, disconnecting the electrical connector of the bulbs to remove it. Then separate the bulb holder from the light unit, replacing any faulty stop bulbs with new ones (in this case, a LED light is installed), as shown in the video.

Now reassemble the rear light, reconnecting it and checking the correct operation of all stop lights.


Posted on 25 September 2026 by ScegliAuto


Related tutorials

How to Remove the Bulb from the Rear Light of a Mercedes Vito
How to Remove the Bulb from the Rear Light of a Mercedes Vito
Mercedes Vito (2003-2013 / MK 2, W639) Before you can start, open the rear door of your Mercedes Vito. Begin by unscrewing and removing the screws that secure the rear light to its housing…
How to replace the front headlight bulbs of the Mercedes Vito
How to replace the front headlight bulbs of the Mercedes Vito
Mercedes Vito (2003-2013 / MK 2, W639) Today we will explain how to quickly and practically replace the front headlight bulbs of the Mercedes Vito. We open the front hood to let more light…
How to Replace the Front Headlamp Bulb on a Mercedes Vito
How to Replace the Front Headlamp Bulb on a Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) To replace the front headlamp bulb on a Mercedes Vito, switch off the engine and open the bonnet. Locate the back of the affected headlamp and remove…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos