Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulb

Model: Mercedes Vito W639, MK 2 - Years 2003-2013
Part: Light bulb

Replacing the front headlight bulb is quite simple as there is enough space behind the headlight to operate without removing anything. Therefore, remove the protective cap behind the headlight by disengaging the fastening tabs, disconnect the bulb's power connector and the retaining spring; pull the old bulb from its socket and insert the new one, orienting it correctly. Secure it by attaching the retaining spring, then reconnect the power connector and reposition the cap. Turn on the headlights to check proper operation, and if you notice a significant difference in brightness between the two headlights, replace the other bulb as well.

Updated on 16 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Position Bulb of the Front Headlamp on a Mercedes Vito
Replacing the Position Bulb of the Front Headlamp on a Mercedes Vito
Mercedes Vito (2003-2013 / W639, MK 2) Today we will discover the information that will allow us to remove and replace the position bulb of the front headlamp on a Mercedes Vito. First, op…
How to Change the Front Headlight Bulb in the Mercedes Vito?
How to Change the Front Headlight Bulb in the Mercedes Vito?
Mercedes Vito (2014-2024 / MK 3, W447) In the Mercedes Vito, you can change the front headlight bulb without needing to remove the entire unit. What you need to remove is only the wheel ar…
How to Replace the Front Headlamp Bulb on a Mercedes Vito
How to Replace the Front Headlamp Bulb on a Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) To replace the front headlamp bulb on a Mercedes Vito, switch off the engine and open the bonnet. Locate the back of the affected headlamp and remove…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos