Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Position Bulb of the Front Headlamp on a Mercedes Vito

Model: Mercedes Vito MK 2, W639 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

See other generations:
Video tutorial

Today we will discover the information that will allow us to remove and replace the position bulb of the front headlamp on a Mercedes Vito. First, open the vehicle's bonnet and start removing the plastic protective cover of the bulbs, located behind the front lamp; then disconnect the electrical connector of the position bulb, remove the bulb holder, and replace the light with a new one (with the same fitting), as shown in the video.

At this point, reassemble the plastic protective cap, also replacing the other daytime running light in the same manner.


Posted on 12 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Mercedes Vito
How to Replace the Front Headlamp Bulb on a Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) To replace the front headlamp bulb on a Mercedes Vito, switch off the engine and open the bonnet. Locate the back of the affected headlamp and remove…
How to Replace the Headlight Bulb on a Mercedes Vito
How to Replace the Headlight Bulb on a Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) In this short and simple guide, you will learn how to remove and replace the dipped beam bulb in the front headlight of a Mercedes Vito. First, move …
How to replace the headlight bulb of the Mercedes Vito.
How to replace the headlight bulb of the Mercedes Vito.
Mercedes Vito (2014-2024 / MK 3, W447) To replace the headlight bulb on the Mercedes Vito, you work from the lower part of the front without removing the headlight. After parking the vehic…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos