Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the radio in the Mercedes Vito?

Model: Mercedes Vito MK 3, W447 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Car stereo

See other generations:
Video tutorial

To replace the radio of the Mercedes Vito, you will need to use a tool such as a screwdriver to lever off the trim panel around the device by disconnecting the underlying clips: at this point it will be possible to locate the screws previously covered by the panel that will need to be loosened.

By unscrewing these screws, it will be possible to disconnect the underlying connector so that the old radio can be removed from its seat: the new one can now be connected and fixed in its place, then covering everything with the corresponding panel.


Posted on 26 May 2025 by ScegliAuto


Related tutorials

How to Remove the Radio from a Mercedes Vito
How to Remove the Radio from a Mercedes Vito
Mercedes Vito (2003-2013 / MK 2, W639) Before you can begin, sit in the driver's seat of your Mercedes Vito. Using a thin but sturdy tool to pry, start by removing the trim surrounding the…
Removing the radio from the Mercedes Vito
Removing the radio from the Mercedes Vito
Mercedes Vito (2003-2013 / MK 2, W639) In this brief and simple guide, you will learn how to remove and replace the standard radio of the Mercedes Vito, following the instructions below. F…
How to Replace the Radio in a Mercedes Vito?
How to Replace the Radio in a Mercedes Vito?
Mercedes Vito (2014-2024 / MK 3, W447) To replace the radio in a Mercedes Vito, use a tool to pry off the trim surrounding the device and remove the side air vents. Once all these elements…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos