Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front door panel of the Mercedes Vito

Model: Mercedes Vito MK 3, W447 - Years 2014-2024
Part: Door trim panel

These short and simple steps will show us how to disassemble and replace the front door panel of the Mercedes Vito. First, we open the front door of the vehicle and start by removing the plastic cover located under the opening handle; then we unscrew the fixing screws found underneath and on the sides of the door panel, as shown in the video. At this point, we lever on the sides to detach the panel, disconnecting the electrical connector and the handle cable; then we reassemble the door panel, applying the reverse procedure!

Posted on 20 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front door panel of the Mercedes Vito
How to disassemble the front door panel of the Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) Today we will see the instructions that will allow us to disassemble and replace the front door panel of the Mercedes Vito. First, we open the front …
Removing the Door Panel of the Mercedes Vito
Removing the Door Panel of the Mercedes Vito
Mercedes Vito (2003-2013 / W639, MK 2) This guide briefly outlines the steps to remove and replace the front door panel of the Mercedes Vito, following the instructions below. First, open …
Disassembly of the front door panel of the Mercedes Vito.
Disassembly of the front door panel of the Mercedes Vito.
Mercedes Vito (2014-2024 / MK 3, W447) .. Today we will learn how to disassemble the front door panel of the Mercedes Vito, in simple steps. First, open the front.. …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos