Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the door panel of a Mercedes Vito W639

Model: Mercedes Vito MK 2, W639 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Door trim panel

See other generations:
Video tutorial

Let's see how to replace the door panel of the Mercedes Vito W639, in order to replace the window switch. Unscrew the screw located in the glove compartment, and remove the small cover located in the compartment next to it. Remove the main cover of the armrest opening, insert a screwdriver into the slot at the bottom and lever it. We will find three more screws along the edge of the panel, which do not unscrew but are removed by pressing with the screwdriver.

With all the screws removed, the panel is only fixed by plastic clips along the entire panel. Put your fingers between the panel and the door and gently pull towards you to unlock the clips one by one. Lift the panel upwards and disconnect the electrical connector.

Unscrew the two torx screws and replace the old switch with the new one.


Posted on 20 November 2025 by ScegliAuto


Related tutorials

How do you set the clock in the Mercedes Vito w639?
How do you set the clock in the Mercedes Vito w639?
Mercedes Vito (2003-2013 / MK 2, W639) The Mercedes Vito w639, of which we have a video presentation, allows us to easily adjust the clock using the buttons on the instrument panel, which …
How to Remove the Turbo on a Mercedes Vito W639
How to Remove the Turbo on a Mercedes Vito W639
Mercedes Vito (2003-2013 / MK 2, W639) The video here demonstrates how to carry out the work mentioned on a Mercedes ML, but the procedure is identical for the Mercedes Vito W639. Lift the…
Removing the Door Panel of the Mercedes Vito
Removing the Door Panel of the Mercedes Vito
Mercedes Vito (2003-2013 / MK 2, W639) This guide briefly outlines the steps to remove and replace the front door panel of the Mercedes Vito, following the instructions below. First, open …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos