Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Pollen Filter on a Mercedes Vito

Model: Mercedes Vito MK 2, W639 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Cabin air filter

See other generations:
Video tutorial

In this video tutorial, you can see how to replace the pollen filter on a Mercedes Vito by following a few simple steps: the first thing to do is purchase a new pollen filter (K 1188); next, get inside the vehicle and turn off the engine, then pull the handbrake.

The cabin filter on this vehicle is located under the windscreen in the upper right part of the engine bay, so lift the bonnet and secure it with the appropriate prop; use a flat-head screwdriver to pry up the plastic cover; with a T25 torx key, unscrew the fastening elements of the metal strip, now you can remove the filter element from its housing, then proceed to clean the housing of any debris.

Position the new filter following the arrow indications on the filter itself.


Updated on 30 July 2026 by ScegliAuto


Related tutorials

How to replace the pollen filter on the Mercedes Vito W638
How to replace the pollen filter on the Mercedes Vito W638
Mercedes Vito (1995-2003 / MK 1, W638) On the Mercedes Vito W638, access the pollen filter by moving the central glove compartment, which is a snap-in module; this is not the glove compart…
How to Replace the Cabin Filter on a Mercedes Vito.
How to Replace the Cabin Filter on a Mercedes Vito.
Mercedes Vito (1995-2003 / MK 1, W638) In this tutorial video, you can see how to replace the cabin filter on a Mercedes Vito by following a few simple steps: the first thing you need to d…
How to perform a full service on the 2010 Mercedes Vito?
How to perform a full service on the 2010 Mercedes Vito?
Mercedes Vito (2003-2013 / MK 2, W639) You can independently perform a full service on the Mercedes Vito 2 without going to a garage, thus saving on labour costs. Gather all the necessary …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos