Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Filter in the Mercedes Vito

Model: Mercedes Vito MK 2, W639 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Cabin air filter

See other generations:
This video is currently unavailable

To ensure a constant flow of clean air in the cabin, replace the cabin filter at the intervals specified in the maintenance schedule. To do this, open the bonnet of the engine compartment.

In the centre of the fire wall, you will find a plastic cover that can be removed with a screwdriver. Unscrew the two screws securing the filter box bracket, allowing you to remove the filter housing.

Extract the old filter element and replace it with a new one. Before inserting it, clean the housing of any dirt, reattach the bracket with its screws, and replace the plastic cover.


Updated on 28 September 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a 2019 Mercedes Vito W447
Mercedes Vito (2014-2024 / MK 3, W447) In the following guide, you will find a description of the short yet important procedure to replace the cabin air filter in your 2019 Mercedes Vito W…
How to replace the cabin filter in the Mercedes Vito van?
How to replace the cabin filter in the Mercedes Vito van?
Mercedes Vito (2003-2013 / MK 2, W639) In this tutorial, we will see how to replace the cabin filter in the Mercedes Vito van, a very simple and quick operation. First, let's open the hood…
Replacing Fuel Filter on Mercedes Vito
Replacing Fuel Filter on Mercedes Vito
Mercedes Vito (1995-2003 / MK 1, W638) Lift the bonnet of your Mercedes Vito. Locate the fuel filter as shown in the video. Unscrew, using a flathead screwdriver, the screw that holds the …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos