Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Indicator Bulbs on Citroen C5

Model: Citroen C5 MK 2, RD, X7 - Years 2008-2017
Part: Side marker bulb

With the engine off and the handbrake engaged, lift the bonnet and secure it. Working on the top of the headlamp, inside the bonnet, remove the upper clips using a flat screwdriver (not your fingers as shown in the video). Remove the upper cover and then take off the indicator bulb cover, as clearly shown in the video. Extract the small bulb in question and replace it with an equivalent one you have purchased. Reassemble everything in reverse order and check the correct operation of the bulb. Cheers!

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light of the Citroen C5
How to Remove the Rear Light of the Citroen C5
Citroen C5 (2000-2008 / DC, MK 1) Here are the instructions on how to remove and replace the rear light and its bulbs of the Citroen C5, following these simple and quick steps. First,…
Dismantling the Stalk Switch and Controls on the Steering Wheel of the Citroen C5 MK1
Dismantling the Stalk Switch and Controls on the Steering Wheel of the Citroen C5 MK1
Citroen C5 (2000-2008 / DC, MK 1) In this video tutorial, you will find the main instructions for dismantling the stalk switch and all the controls on the steering wheel of the first …
Replace Rear Light Bulbs on Citroën C5
Replace Rear Light Bulbs on Citroën C5
Citroen C5 (2000-2008 / DC, MK 1) Are the rear light bulbs on a C5 damaged? Let's see how to replace them. Lift the tailgate, remove the covering cloth (located on the right or left s…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos