Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace and Install Turbo Components

Model: Citroen C5 DC, MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Engine

See other generations:
Video tutorial

Once you have removed the two turbo engine components involved in the maintenance operation, open the package of the replacement parts. First, take the connecting bolts between the two components and screw them into the appropriate holes.

Now position the metal gasket and join the two components, securing them in place with the appropriate nuts (setting the spanner to a specific torque of 2.5 Kpm). Once the two components are joined, insert the other gasket and connect the feed pipe (again, set the spanner to a specific torque of 1.5 Kpm). Finally, lubricate the oil hole and screw in the feed pipe (spanner setting = 2.0 Kpm). Now, position the turbo components in the designated housing of the engine.

After inserting the connecting bolts, place the gasket and components.

Tighten the locking bolts with the spanner set to 2.5 Kpm. The car on which the maintenance operation is being performed, as seen in the images, is a Citroen C5.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

Replacing the Cylinder Head Gasket
Replacing the Cylinder Head Gasket
Citroen C5 (2000-2008 / DC, MK 1) When performing a repair that requires the removal of the cylinder head, it is good practice to use a new set of gaskets and bolts during reassembly:…
How to Replace the Cabin Filter on the Citroën C5?
How to Replace the Cabin Filter on the Citroën C5?
Citroen C5 (2008-2017 / RD, X7, MK 2) To replace the cabin filter on the Citroën C5, loosen the panel located on the side of the driver's footwell, corresponding to the central panel. Onc…
Camshaft Oil Seal Replacement
Camshaft Oil Seal Replacement
Citroen C5 (2000-2008 / DC, MK 1) Replacing the camshaft oil seal is straightforward but requires removing the timing pulley and the timing belt itself: you need to be familiar with d…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos