Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Camshaft Oil Seal Replacement

Model: Citroen C5 DC, MK 1 - Years 2000-2008
Part: Engine oil

Replacing the camshaft oil seal is straightforward but requires removing the timing pulley and the timing belt itself: you need to be familiar with disassembly while maintaining the timing references. Once the timing components are removed and the old oil seal is extracted, clean the seating area thoroughly, lubricate both the seating and the new oil seal generously with clean oil, and insert it with the lip facing inward, pressing it in until it is fully seated with the appropriate tool. Then, install the timing pulley and the timing belt.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Camshaft Replacement
Instructions for Camshaft Replacement
Citroen C5 (2000-2008 / DC, MK 1) First, insert the new valve control pins, ensuring they are positioned correctly; then fit the levers and the new camshaft, generously lubricating th…
Replacing the Cylinder Head Gasket
Replacing the Cylinder Head Gasket
Citroen C5 (2000-2008 / DC, MK 1) When performing a repair that requires the removal of the cylinder head, it is good practice to use a new set of gaskets and bolts during reassembly:…
Replacement of Rocker Cover Gasket
Replacement of Rocker Cover Gasket
Citroen C5 (2000-2008 / DC, MK 1) Before proceeding with the installation of the new rocker cover gasket, thoroughly clean both the seat under the cover and on the cylinder head to re…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos