Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C5
    4. : Engine oil

Citroen C5 - Engine oil

Citroen C5 (2008-2017 / RD, X7, MK 2)
How do you top up the engine oil in the Citroën C5?
In order to perform an engine oil top-up on the Citroën C5, you need to open the hood so that you can access the components located inside the engine …read all…
Posted on 15 July 2023 by ScegliAuto
Citroen C5 (2000-2008 / DC, MK 1)
Camshaft oil seal replacement
Replacing the camshaft oil seal is very simple to carry out but nevertheless requires disassembly of the timing toothed pulley and therefore of the belt …read all…
Posted on 11 August 2023 by ScegliAuto
Airbags (2) Loudspeaker (2) Car stereo (5) Anti roll bar (1) Battery (4) Bushings (1) Arm (1) Gearbox (1) Glow plugs (2) Control unit (1) Key (4) Timing belt (3) -board computer (3) Checks and maintenance (11) Dashboard (3) Gearshift gaiter (2) Headlight (1) Tail light (2) Particulate filter (1) Air filter (2) Cabin air filter (11) Diesel filter (1) Accessory Kit (1) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (8) Rear light bulb (3) License plate light (1) Handle (2) Engine (8) Gear oil (1) Engine oil (2) Door panel (7) Front bumper (2) Hydraulic pistons (1) Gear Shift Knob (4) Door (2) Instrument cluster (12) Radiator (2) Fuse box (11) Coolant temperature sensor (1) Suspensions (3) Outside rearview mirror (2) Engine mount (2) Windscreen wipers (1) Central tunnel (1) Interior blower (1)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos