Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. C5
  6. : -board computer

Citroen C5 - -board computer

Citroen C5 (2000-2008 / DC, MK 1)
How to reset Citroen C5 engine oil warning light

In this our new mini guide we will find out how to correctly reset the engine oil warning light inside the Citroen C5. This is a very simple operation within …read all…
Posted on 8 April 2024 by ScegliAuto
Citroen C5 (2000-2008 / DC, MK 1)
How to deactivate the passenger airbag of the Citroen C5

The airbag is a very important component as it significantly increases safety during accidents and, consequently, decreases the risk of serious damage to …read all…
Posted on 8 April 2024 by ScegliAuto
Citroen C5 (2000-2008 / DC, MK 1)
Instrument panel disassembly instructions

Disassembly of the instrument panel is very simple to carry out since it is fixed to the dashboard by means of interlocking tabs; It is therefore sufficient to …read all…
Posted on 17 August 2023 by ScegliAuto

Airbags (2) Loudspeaker (2) Car stereo (5) Anti roll bar (1) Battery (4) Bushings (1) Arm (1) Gearbox (1) Glow plugs (2) Control unit (1) Key (4) Timing belt (3) -board computer (3) Checks and maintenance (11) Dashboard (3) Gearshift gaiter (2) Headlight (1) Tail light (2) Particulate filter (1) Air filter (2) Cabin air filter (11) Diesel filter (1) Accessory Kit (1) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (8) Rear light bulb (3) License plate light (1) Handle (2) Engine (8) Gear oil (1) Engine oil (2) Door panel (7) Front bumper (2) Hydraulic pistons (1) Gear Shift Knob (4) Door (2) Instrument cluster (12) Radiator (2) Fuse box (11) Coolant temperature sensor (1) Suspensions (3) Outside rearview mirror (2) Engine mount (2) Windscreen wipers (1) Central tunnel (1) Interior blower (1)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos