Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C5
    4. : Instrument panel disassembly instructions

Citroen C5 - Video tutorial

Model: Citroen C5 DC, MK 1 - Years 2000-2008
Part: -board computer
Operation: Instrument panel disassembly instructions

Disassembly of the instrument panel is very simple to carry out since it is fixed to the dashboard by means of interlocking tabs; It is therefore sufficient to pry along the lower edge in order to release the tabs obviously paying attention not to damage the dashboard; once the instrument panel has been extracted, disconnect the socket on the rear by releasing the fastening safety device. It is suggested to use a plastic lever rather than a screwdriver in order to avoid any scratches on the dashboard and at the same time not to exceed with force so as not to damage the dial itself.


Posted on 17 August 2023 by ScegliAuto

    Frequently Asked Questions

    • C5 2008-2017 - How to fix Citroen C5 update problems? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos