Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Disassembling the Rear Door

Model: Citroen C5 DC, MK 1 - Years 2000-2008
Part: Car door

Start by removing the lower fastening of the driver's seatbelt and then the plastic cover of the door pillar; unscrew the fastening screws of the door pull, slide off the rubber protection of the grommet and disconnect the electrical connector, closing the door to access the connector more easily; in this same position, unscrew the fastening pins of the two support brackets of the hinges and reopen the door, supporting it to remove it completely (take care with this last manoeuvre due to the weight of the door).

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Disassembling the Car Radio
Instructions for Disassembling the Car Radio
Citroen C5 (2000-2008 / DC, MK 1) Disassembling the car radio is extremely simple and does not require special tools: simply remove the plastic caps located at both ends of the radio …
Disassembly of the rear headlight of the Citroen C5
Disassembly of the rear headlight of the Citroen C5
Citroen C5 (2008-2017 / MK 2, RD, X7) In this short guide, we will see the instructions that will allow us to disassemble and replace the rear light and its bulbs of the Citroen C5. First…
How to Remove the Door Panel on a Citroen C5
How to Remove the Door Panel on a Citroen C5
Citroen C5 (2008-2017 / MK 2, RD, X7) Perform the removal of the door panel (right side) on a Citroen C5: disconnect the battery terminals located in the engine bay, use a screwdriver to …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos