Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear taillight bulbs of the Citroen C5

Model: Citroen C5 RD, X7, MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tail light bulb

See other generations:
Video tutorial

In this guide we will see the instructions that will allow us to disassemble and replace the position bulbs of the rear headlight of the Citroen C5. First of all, we open the rear door of the trunk and start removing the plastic cover of the rear door lining, thus accessing the position lights; disconnect the electrical connector of the bulb and unscrew the screw of the headlight to remove it from the outside, as shown in the video.

At this point we replace the position light with the new one, of the right type and having the same attachment; finally, we reassemble the headlight!


Posted on 3 September 2025 by ScegliAuto


Related tutorials

How to Remove the Rear Light of the Citroen C5
How to Remove the Rear Light of the Citroen C5
Citroen C5 (2000-2008 / DC, MK 1) Here are the instructions on how to remove and replace the rear light and its bulbs of the Citroen C5, following these simple and quick steps. First,…
Disassembly of the rear headlight of the Citroen C5
Disassembly of the rear headlight of the Citroen C5
Citroen C5 (2008-2017 / RD, X7, MK 2) In this short guide, we will see the instructions that will allow us to disassemble and replace the rear light and its bulbs of the Citroen C5. First…
How to Change the Brake Light Bulbs on the Citroen C5
How to Change the Brake Light Bulbs on the Citroen C5
Citroen C5 (2008-2017 / RD, X7, MK 2) In this video tutorial, you will see how to replace the bulbs in the rear light of the Citroen C5 by following the instructions below. First, open th…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos