Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. C5
  6. : Rear light bulb

Citroen C5 - Rear light bulb

Citroen C5 (2008-2017 / RD, X7, MK 2)
How to change the brake lights of the CItroen C5

In this video tutorial we will see how to replace the rear light bulbs of the Citroen C5, following the instructions below. First of all, we open the tailgate …read all…
Posted on 26 April 2024 by ScegliAuto
Citroen C5 (2000-2008 / DC, MK 1)
Replace tail light bulbs on C Citrone C5

Are the rear light bulbs of a C5 damaged? Let's see how they replace each other. Lift the tailgate, remove the cover cloth (located on the right or left side …read all…
Posted on 6 December 2023 by ScegliAuto
Citroen C5 (2008-2017 / RD, X7, MK 2)
Citroen C rear brake lights replacement

To replace the brake light bulbs, proceed as follows. Fixed stop (1): open the luggage compartment and remove the access cap towards the stop; unscrew the two …read all…
Posted on 12 November 2023 by ScegliAuto

Airbags (2) Loudspeaker (2) Car stereo (5) Anti roll bar (1) Battery (4) Bushings (1) Arm (1) Gearbox (1) Glow plugs (2) Control unit (1) Key (4) Timing belt (3) -board computer (3) Checks and maintenance (11) Dashboard (3) Gearshift gaiter (2) Headlight (1) Tail light (2) Particulate filter (1) Air filter (2) Cabin air filter (11) Diesel filter (1) Accessory Kit (1) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (8) Rear light bulb (3) License plate light (1) Handle (2) Engine (8) Gear oil (1) Engine oil (2) Door panel (7) Front bumper (2) Hydraulic pistons (1) Gear Shift Knob (4) Door (2) Instrument cluster (12) Radiator (2) Fuse box (11) Coolant temperature sensor (1) Suspensions (3) Outside rearview mirror (2) Engine mount (2) Windscreen wipers (1) Central tunnel (1) Interior blower (1)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos