Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C5
    4. : Bushings

Citroen C5 - Bushings

Citroen C5 (2008-2017 / RD, MK 2, X7)
How to replace the stabilizer bar bushings in the Citroen C5?
In this tutorial we can see how to replace the stabilizer bar silent blocks in the Citroen C5, a simple operation but one that requires good manual skills. …read all…
Posted on 28 April 2024 by ScegliAuto
Airbags (2) Loudspeaker (2) Car stereo (5) Anti roll bar (1) Battery (4) Bushings (1) Arm (1) Gearbox (1) Glow plugs (2) Control unit (1) Key (4) Timing belt (3) -board computer (3) Checks and maintenance (11) Dashboard (4) Gearshift gaiter (2) Headlight (1) Tail light (2) Particulate filter (1) Air filter (2) Cabin air filter (11) Diesel filter (1) Accessory Kit (1) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (9) Rear light bulb (3) License plate light (1) Handle (2) Engine (8) Gear oil (1) Engine oil (2) Door panel (8) Front bumper (2) Hydraulic pistons (1) Gear Shift Knob (4) Door (2) Instrument cluster (12) Radiator (2) Fuse box (11) Coolant temperature sensor (1) Suspensions (3) Outside rearview mirror (2) Engine mount (2) Windscreen wipers (1) Central tunnel (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos