Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the window switch panel in Peugeot vehicles

Model: Peugeot Peugeot Various
Part: Window switch

Video tutorial

To remove the window switch panel in Peugeot vehicles, you will need a Phillips screwdriver and a flathead screwdriver. Open the left front door and using the Phillips screwdriver, unscrew the screw that secures the switch panel to the door.

Next, insert the flathead screwdriver along the edge to gently pry upwards to release the switch panel. Once removed, disconnect the connector to complete the removal.

Reassembly follows the reverse procedure. The cause of the switch panel failure can be attributed to either a button or the internal connector, so before completing the replacement, check that the connector shows no signs of rust or broken wires.


Posted on 22 October 2026 by ScegliAuto


Related tutorials

How to replace the battery of the remote control for Peugeot vehicles 1007, 207, 307, 407, 208, and 308.
How to replace the battery of the remote control for Peugeot vehicles 1007, 207, 307, 407, 208, and 308.
Peugeot Peugeot Various The following video tutorial will show us the steps to replace the battery of the remote control for Peugeot vehicles 1007, 207, 307, 407, 208, and 3…
How to Reset the Service Light on Peugeot Vehicles
How to Reset the Service Light on Peugeot Vehicles
Peugeot Peugeot Various Resetting the service light on Peugeot vehicles is a very simple and quick operation that can be done independently. However, it is important to perf…
How to replace the electric handbrake button on Peugeot 5008 and 3008 vehicles
How to replace the electric handbrake button on Peugeot 5008 and 3008 vehicles
Peugeot Peugeot Various Today we will illustrate the steps to replace the electric handbrake button of Peugeot 3008 and 5008 vehicles. The first step is to remove the gear s…

How to Replace the External Door Handle on a Renault Master

Today's instructions will show you the procedure for removing and replacing the external door handle on the front door of the Renault Master. First, open the front door and start removing the door panel by unscrewing all the fixing screws; then unscrew the handle screws, pulling it out from the outside as shown in the video. At this point, install the new external handle, as well as the original one, checking its proper operation; finally, reassemble the door panel, following the video until the end!

Watch the video!


by ScegliAuto

More videos