Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on Peugeot Vehicles

Model: Peugeot Peugeot Various
Part: Service warning light

The procedure to reset the service light or maintenance light on all Peugeot vehicles follows the same steps. The reset should always be performed after carrying out mandatory maintenance and checks within the year or mileage. Start by inserting the key into the ignition of the vehicle and hold down the button on the odometer while turning on the instrument panel. Keep the button pressed for another 10 seconds and release it only after the symbol '0' appears on the display and the light turns off. Conclude by turning off the instrument panel.

Updated on 20 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on Peugeot Vehicles
How to Reset the Service Light on Peugeot Vehicles
Peugeot Peugeot Various Resetting the service light on Peugeot vehicles is a very simple and quick operation that can be done independently. However, it is important to perf…
How to reset the service light on a Peugeot
How to reset the service light on a Peugeot
Peugeot Peugeot Various When the service light comes on in Peugeot vehicles 106, 206, 306, and 406, we must perform the necessary maintenance and then proceed with resetting…
How to Program the Peugeot Car Remote?
How to Program the Peugeot Car Remote?
Peugeot Peugeot Various To program a key for a Peugeot vehicle, get inside the car and close the windows and the front and rear doors. Press the lock and unlock buttons on t…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos