Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on a Peugeot

Model: Peugeot Peugeot Various
Part: Service warning light

When the service light comes on in Peugeot vehicles 106, 206, 306, and 406, we must perform the necessary maintenance and then proceed with resetting the light. To reset it, we must insert the key into the ignition and simultaneously press the TRIP A button on the instrument panel. The display on the instrument panel will start a countdown to complete the reset of the light, and it is important to continue holding down the button during this procedure. Once the countdown is finished, release the button and turn off the instrument panel, then turn it back on to complete the service light reset procedure.

Posted on 15 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on Peugeot Vehicles
How to Reset the Service Light on Peugeot Vehicles
Peugeot Peugeot Various Resetting the service light on Peugeot vehicles is a very simple and quick operation that can be done independently. However, it is important to perf…
How to reset the AdBlue warning light on a Peugeot vehicle
How to reset the AdBlue warning light on a Peugeot vehicle
Peugeot Peugeot Various To reset the AdBlue warning light on a Peugeot vehicle, it is first necessary to top up the liquid inside the tank. Once this operation has been carr…
How to Reset the Service Light on Peugeot Vehicles
How to Reset the Service Light on Peugeot Vehicles
Peugeot Peugeot Various The procedure to reset the service light or maintenance light on all Peugeot vehicles follows the same steps. The reset should always be performed af…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos