Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Door Speakers of the Peugeot 307

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Speaker

Video tutorial

In this guide, you will find instructions to dismantle and replace the door speakers of the Peugeot 307. First, open the vehicle door and start removing the door panel; to do this, unscrew all the fastening screws located on the sides, also detaching the window switch panel and disconnecting the wiring located underneath, as shown in the video.

At this point, unscrew the screws of the speaker, disconnecting the power connector; replace and install the new speaker, testing its operation before reassembling the door panel.


Posted on 2 September 2026 by ScegliAuto


Related tutorials

How to replace the speakers in a Peugeot 307?
How to replace the speakers in a Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) To replace the speakers in a Peugeot 307, completely remove the corresponding door panels to access the underlying speakers: to remove the panels, un…
How to Activate the Automatic Door Locking on the Peugeot 307
How to Activate the Automatic Door Locking on the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Below are the instructions to activate and deactivate the automatic door locking on the Peugeot 307. First, get inside the vehicle and start the engi…
How to Replace the Front Speakers on the Peugeot 307?
How to Replace the Front Speakers on the Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) In this video tutorial, you will see how to remove and replace the front speakers, as well as the rear ones, on the first series Peugeot 307. First, …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos