Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Speakers in a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Speaker

To replace the front speakers in a Peugeot 206, you need to remove the inner door panel. Turn off the radio, then remove the screws securing the panel, including those near the handle and armrest. Use a plastic lever to unclip the clips around the perimeter and gently lift the panel, disconnecting any electrical connectors. Now locate the speaker, unscrew the screws securing it to the door, and remove it from its housing. Disconnect the connector at the back and connect it to the new compatible speaker. Position the component, tighten the screws, and check the system's operation. Finally, reassemble the panel, reconnect the electrical plugs, clip all the clips back in place, and reinstall the removed screws.

Posted on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the speaker in the Peugeot 206
How to replace the speaker in the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this video, see how to replace the speakers in your Peugeot 206. The speakers are located in the door, behind the appropriate cover. To replace th…
How to replace the speakers of the Peugeot 206
How to replace the speakers of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) How do you replace the speakers of a Peugeot 206? We see it in this video. In the video it is not described, but we must first remove the internal do…
How to Replace the Front Speakers in a Peugeot 206?
How to Replace the Front Speakers in a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) Replacing the front speakers in a Peugeot 206 is an extremely simple and quick operation. First, ensure the key is not in the ignition, then open the…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos