Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Tail light bulb

Video tutorial

Before you can start, open the tailgate of your Peugeot 207. Begin by moving the side carpet in the boot. Next, unscrew and remove the internal screw that secures the rear light to the car, then extract the light from its housing.

Once done, disconnect the corresponding electrical connector, then release the clip that secures the bulb holder to the rear light and remove the bulb holder itself. At this point, unclip and remove the blown bulb, and the disassembly will be complete.

To fit the new bulb in your Peugeot 207, follow these instructions in reverse, and the replacement will be finished.


Updated on 23 April 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on a Peugeot 207
How to Replace the Rear Light Bulb on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this mini guide dedicated to your Peugeot 207, discover how to replace the rear light bulb. Before starting, ensure the car is off, then unlock th…
How to replace the rear light bulb on a Peugeot 207 SW
How to replace the rear light bulb on a Peugeot 207 SW
Peugeot 207 (2006-2015 / MK 1) In this guide for all Peugeot 207 SW owners, you will discover the steps to correctly replace the rear light bulb. First, lift the rear hatch and rem…
How to Replace the Rear Light Bulb of a Peugeot 207
How to Replace the Rear Light Bulb of a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Replacing the rear light bulb of a Peugeot 207 is a task you can do independently by following a few simple steps. First, open the boot. Second, remo…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos