Do it yourself
| ||||
|
Volkswagen Golf - Video tutorial
Model: Volkswagen Golf
Golf 5, MK 5, Golf V
- Years 2003-2008 When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.
Posted on 29 April 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsWhere are the fuses of the Volvo FH located?All the fuses of the Volvo FH are located inside the fuse box located in the vehicle cabin: in order to access the box it will be necessary to unhook the internal fixing clips that block the panel in the upper part of the dashboard, along its entire length. extension. Once this panel has been removed, it will be possible to access the fuses and replace them if necessary: here it will be possible to identify the fuses that take care of the operation of the windshield wipers, the cigarette lighter, the headlights, etc. In the vehicle manual each fuse is indicated with its amperage. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.025
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |