|
Do it yourself
| |||
| ||||
Resetting the Steering Angle Sensor on a Volkswagen Golf.
Model: Volkswagen Golf
MK 7, Golf 7, Golf VII
- Years:
2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Video tutorial
This video explains how to reset the steering angle sensor on a Volkswagen Golf. This method is also effective for the Jetta, Passat, Routan, Tiguan, Beetle, and Touareg models. The first step is to start the car's engine. Next, turn the steering wheel fully anti-clockwise and then do the same fully clockwise. You need to perform this step twice. Finally, centre the steering wheel and turn off the car. Once restarted, the steering angle sensor warning light should be off. If it is not, it is advisable to perform calibration using a suitable scanner.
Updated on 9 July 2026 by ScegliAuto
Related tutorials
Volkswagen Golf
(2003-2008 /
Golf 5, MK 5, Golf V)
The procedure to replace the steering angle sensor on a Volkswagen Golf involves removing the steering wheel from its housing. To do this, loosen the…
Volkswagen Golf
(1997-2003 /
Golf IV, Golf 4, MK 4)
To replace the steering angle sensor on a Volkswagen Golf, you need to loosen the screws securing the airbag located at the centre of the steering wh…
Volkswagen Golf
(2003-2008 /
Golf 5, MK 5, Golf V)
When the steering angle sensor malfunction warning light comes on, it may be necessary to replace it as follows: first, remove the steering wheel and…
Other guides you may be interested in
|
Frequently Asked QuestionsWhere to Find and How to Remove the Spare Wheel of a Peugeot 5008?
The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.089
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |