Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Steering Angle Sensor on a Volkswagen Golf?

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Checks and maintenance

To replace the steering angle sensor on a Volkswagen Golf, you need to loosen the screws securing the airbag located at the centre of the steering wheel: these screws will be at the back of the wheel. Once loosened, you can pull the airbag out of its housing, disconnecting its connector. Then, loosen the central nut securing the steering wheel, completely removing it along with the panels covering the steering column. Underneath, you will find the steering angle sensor, which can be removed from its housing by disconnecting its connector and then replacing it with a new one.

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) The procedure to replace the steering angle sensor on a Volkswagen Golf involves removing the steering wheel from its housing. To do this, loosen the…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) To replace the steering angle sensor on the Volkswagen Golf, it is necessary to unscrew the screws that secure the airbag located in the center of th…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) This video explains how to reset the steering angle sensor on a Volkswagen Golf. This method is also effective for the Jetta, Passat, Routan, Tiguan,…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos