|
Do it yourself
| |||
| ||||
The reason why a Volkswagen Golf 1.4 TDI 125 HP can consume a lot of oil
Model: Volkswagen Golf
MK 7, Golf 7, Golf VII
- Years:
2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Video tutorial
In this video we can see the reason why the engine of a Volkswagen Golf VII with a 1.4 TSI 125 HP engine consumed a lot of oil. We can see that the piston rings of this car are full of sludge, while the connecting rod bearings are immaculate. The car has not traveled many kilometers, and the reason for this excessive consumption and damage is the use of an oil not suitable for the needs of this car, or it was a low-quality lubricant: If we look at the cylinder head, even the valves are full of the same sludge, a clear sign of an unsuitable oil, which could have been either an oil with characteristics not suitable for those required by the Manufacturer, or a cheap oil with formulations that can reduce the engine's efficiency. In both cases, the engine tries to remedy it by consuming more oil and producing those residues that we have seen on the pistons and cylinder head, causing significant damage that requires a high economic expense to be repaired.
Posted on 21 August 2025 by ScegliAuto
Related tutorials
Volkswagen Golf
(2012-2019 /
MK 7, Golf 7, Golf VII)
Today's information will show us how to perform the routine maintenance service, replacing the engine oil and oil filter, on a Volkswagen Golf 2.0 TD…
Volkswagen Golf
(2003-2008 /
Golf 5, MK 5, Golf V)
In this video tutorial, you will learn how to replace the timing belt on a fifth-generation Volkswagen Golf, as well as on Audi, Seat, and Skoda mode…
Volkswagen Golf
(1997-2003 /
Golf IV, Golf 4, MK 4)
In response to the question: how reliable can a Volkswagen TDI engine be? We answer with this video showing a Volkswagen Golf with an impressive 331,…
Other guides you may be interested in
|
How to Activate the Disabled TRC on the Toyota Yaris?
As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.024
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |