Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rocker Cover on the Volkswagen Golf - Polo - Jetta 1.9 TDI

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Cylinder head

See other generations:
Video tutorial

In this video tutorial, you will see how to remove and replace the rocker cover and gasket on the Volkswagen Golf Mk5 1.6 TDI, as well as on the Polo and Jetta. First, open the bonnet of your car and remove the upper engine cover; then, unscrew the fixing screws of the upper valve cover and disconnect the metal levers found below, as shown in the video.

At this point, move the wiring of the aluminium pipes to remove the valve cover; remove and replace the old gasket!


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to Replace the Glow Plugs on a Volkswagen Golf Mk5 2.0 TDI?
How to Replace the Glow Plugs on a Volkswagen Golf Mk5 2.0 TDI?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) This guide shows how to replace the glow plugs in the engine of a Volkswagen Golf Mk5 2.0 TDI. First, secure the vehicle and access the engine bay. T…
How to Replace the Thermostat on a Volkswagen Golf 1.9 TDI
How to Replace the Thermostat on a Volkswagen Golf 1.9 TDI
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this brief and simple guide, follow the steps to dismantle and replace the thermostat on a Volkswagen Golf 1.9 TDI. First, open the bonnet of your…
How to Remove the Pump Injectors from the VW Golf
How to Remove the Pump Injectors from the VW Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) The failure of the pump injectors and their wiring that equip VW and Audi engines is well recognised, and the peculiarity lies in their location: the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos