Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time in the Renault Twingo?

Model: Renault Twingo Twingo 2 - Years 2007-2014
Part: Clock

As shown in this tutorial, setting the time in the Renault Twingo 2 is a very simple and quick operation. Start by turning on the instrument cluster; it is not necessary to start the engine. Then, press and hold the indicated button located at the far right of the dashboard. Once the time starts to flash, set it with quick presses of the same button. To move to the minute setting, avoid pressing it for a couple of seconds. Once finished, wait another 2 seconds to return to the main screen.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Time on the Renault Twingo 2?
How to Set the Time on the Renault Twingo 2?
Renault Twingo (2014-2024 / Twingo 3, Twingo III) Setting the time on the new Renault Twingo from 2014 onwards is very simple. From the central panel of the car, start by clicking the Setup button be…
How to set the time on the Renault Twingo
How to set the time on the Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) Today we will see the instructions that will allow us to set the clock on the instrument panel display of the Renault Twingo, for example after a bat…
How to Set the Time in a Renault Twingo?
How to Set the Time in a Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) In this tutorial, you will see how to set the time in a Renault Twingo, a very simple and quick operation to perform, for example, after replacing th…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos