Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clock Bulb in the Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Clock

Video tutorial

To replace the backlight bulb of the clock in the Peugeot 207, obtain a very thin plastic lever and use it to remove the silver trim around the clock and the vents. Using a Torx screwdriver, unscrew the two screws at the bottom and remove the air vents.

Unscrew, with the same screwdriver, the two screws at the sides of the clock, extract it and rotate it; at the back, you will find the white bulb holder, rotate it to remove the burnt bulb and replace it with a new one. Check that it works and reassemble everything by reversing the operations.


Updated on 25 September 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on the Peugeot 207
How to Replace the Front Headlamp Bulb on the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To complete the replacement of the front headlamp bulb on your Peugeot 207, follow these simple steps. First, park your Peugeot 207 on a flat surface…
How to replace the headlight bulb on the Peugeot 207?
How to replace the headlight bulb on the Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) To replace the headlight bulb on the Peugeot 207, open the bonnet to access the rear of the headlight. Here, remove the circular protective cover to …
How to Replace the Front Headlamp Bulb on the Peugeot 207
How to Replace the Front Headlamp Bulb on the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Replacing the front bulb on the Peugeot 207 involves simple steps. Start by opening the bonnet and then remove the cover of the right headlamp unit. …

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos