Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light on a Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Tail light

Video tutorial

Before you can start, open the tailgate of your Peugeot 207. Begin by moving the side carpet in the boot. Next, unscrew and remove the internal screw that secures the rear light to the car. Once done, extract the light from its housing.

After you have removed the light from its position, disconnect the corresponding electrical connector, and you will have completed the disassembly. To fit the new rear light on your Peugeot 207, follow these steps in reverse, and the replacement will be finished.


Updated on 23 April 2026 by ScegliAuto


Related tutorials

Replacing the Rear Headlamp Bulbs on Peugeot 207
Replacing the Rear Headlamp Bulbs on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Replace the damaged bulbs inside the rear headlamp of your Peugeot 207. Open the boot and remove the side trim panel. Locate the screws securing the …
How to Replace the Rear Light Bulb on a Peugeot 207
How to Replace the Rear Light Bulb on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Before you can start, open the tailgate of your Peugeot 207. Begin by moving the side carpet in the boot. Next, unscrew and remove the internal screw…
Removing the Rear Light of a Peugeot 207
Removing the Rear Light of a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Is the rear light damaged? Let’s see how to remove the rear light from a 207. Lift the boot lid, and using a socket spanner, undo the securing nuts l…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos