Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Light of a Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Tail light

Video tutorial

Is the rear light damaged? Let’s see how to remove the rear light from a 207. Lift the boot lid, and using a socket spanner, undo the securing nuts located at the side of the boot (rear of the rear light). Once the light is free from any constraints, detach it from the bodywork (disconnect the relevant power connectors).

Replace any damaged bulbs with identical size and voltage replacements. Secure the new light above the rear of the car and tighten the securing nuts.

Replace any damaged bulbs with new ones. Turn on the lights to test their operation.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

Replacing the Rear Headlamp Bulbs on Peugeot 207
Replacing the Rear Headlamp Bulbs on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Replace the damaged bulbs inside the rear headlamp of your Peugeot 207. Open the boot and remove the side trim panel. Locate the screws securing the …
How to Replace the Rear Light on a Peugeot 207
How to Replace the Rear Light on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Before you can start, open the tailgate of your Peugeot 207. Begin by moving the side carpet in the boot. Next, unscrew and remove the internal screw…
How to Replace the Rear Light Bulb on a Peugeot 207
How to Replace the Rear Light Bulb on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Before you can start, open the tailgate of your Peugeot 207. Begin by moving the side carpet in the boot. Next, unscrew and remove the internal screw…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos