Do it yourself
Frequently asked questions about cars and motorcycles

What to Do If the Sunroof on the Peugeot 207 CC Does Not Retract into the Boot

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Body

The issue described is unfortunately a common problem with the Peugeot 207 CC: the roof opens but gets stuck in an intermediate position when closing into the boot; as a result, the rear hatch does not close completely because the system does not receive the signal that the roof is properly stowed. The problem is almost always a micro-switch in the boot that is not activated. Its role is to signal to the control unit that the roof panel is fully folded, allowing the hatch to close. It is not activated because the plastic lever that should push on it has worn out, or because the metal part of the roof that should press that lever is slightly dented. Manually close the roof to the point where it gets stuck; open the hatch and look on the left side of the compartment, under the plastic cover: you will find the black plastic lever. Check the metal part of the roof above this lever for any dents that prevent the metal from pushing the lever sufficiently. The idea is to create a spacer at the contact point. A 5 pence coin will suffice; clean the dented area and firmly wedge the coin into the dent. To prevent the coin from coming loose due to vibrations, apply a drop of silicone before positioning it. Try closing the roof, which should now close without issues.

Posted on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 207 (2006-2015 / MK 1) We can take advantage of a beautiful sunny day to appreciate driving with the wind in our hair that the Peugeot 207 CC can give us and open its hood.…
Peugeot 207 (2006-2015 / MK 1) The convertible version of the Peugeot 207, namely the Peugeot 207 cc, could suddenly show electrical problems with the opening of the roof, which ca…
Peugeot 207 (2006-2015 / MK 1) If the sunroof is not working as it should, there is no need to panic. The first thing to do is to connect your OBD2, which is the diagnostic interfa…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos