Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Gearbox Oil on a Hyundai i30

Model: Hyundai I30 PD, MK 3 - Years 2016-2024
Part: Transmission fluid

This guide outlines the main steps to change the gearbox oil on a Hyundai i30. First, open the bonnet and remove the air filter housing. Then, unscrew the oil filler cap using a socket spanner, as shown in the video. Next, lift the vehicle to unscrew the transmission oil drain bolt; allow the oil to drain into a container. Finally, pour in the new gearbox oil until it reaches the correct level!

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Knob on a Hyundai i30?
How to Replace the Gear Knob on a Hyundai i30?
Hyundai I30 (2016-2024 / PD, MK 3) To replace the gear knob on a Hyundai i30, grip the gear gaiter to pull the knob upwards, detaching it completely. Once the old knob is removed from …
How to reset the service light on the Hyundai i30.
How to reset the service light on the Hyundai i30.
Hyundai I30 (2011-2016 / MK 2, GD) Today we will explain how to reset the oil light on a Hyundai i30 model mk2 after performing an oil change. To reset the light, we need to turn on th…
How to Replace the Gear Knob on a Hyundai i30
How to Replace the Gear Knob on a Hyundai i30
Hyundai I30 (2011-2016 / MK 2, GD) The instructions provided in this guide will illustrate the procedure for removing and replacing the manual gear knob of a Hyundai i30. First, get in…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos