Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the third brake light of the Peugeot 108.

Model: Peugeot 108 MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part:

This video is currently unavailable

These brief and simple steps will show us how to disassemble and replace the rear light and the bulbs of the third brake light on the Peugeot 108. First, let's open the rear hatch of the trunk and start detaching the third brake light from the inside; then we disconnect the electrical connector of the bulbs, as shown in the video.

At this point, we separate the light cover from the bulbs, replacing either the bulbs themselves or the entire third brake light; we then reassemble the light and reconnect the electrical connection, finally checking the proper functioning of the brake lights!


Posted on 5 January 2026 by ScegliAuto


Related tutorials

How to Replace the Third Brake Light Bulb on a Peugeot 108
How to Replace the Third Brake Light Bulb on a Peugeot 108
Peugeot 108 (2014-2021 / MK 1) To replace the third brake light bulb on a Peugeot 108, open the rear hatch of the car to access the black protective panel located on the upper inte…
Position and function of the air conditioning pressure sensor on the Peugeot 108
Position and function of the air conditioning pressure sensor on the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) The air conditioning pressure sensor, also known as a pressure switch, is a fundamental component in the air conditioning system of our Peugeot 108: …
How to replace the headlight bulb of the Peugeot 108
How to replace the headlight bulb of the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) Today we will explain the steps to replace the front headlight bulb of a Peugeot 108 on your own. The first step is to park the vehicle on a flat sur…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos