Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Turn On and Off the Fog Lights of the Peugeot 508

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Headlight

Today, I will explain how to turn on and off the fog lights of the Peugeot 508. The headlight switch is located on the left stalk of the steering wheel. To turn on the lights, first start the vehicle and then rotate the switch from the dipped beam to the fog lights upwards. To turn off the lights, first rotate the fog light switch downwards and then the dipped beam switch. If the lights do not turn on, it may be necessary to replace the fog light fuse or the bulb.

Posted on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Fog Light Bulbs on a Peugeot 508
Replacing the Front Fog Light Bulbs on a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Below are the instructions that will allow you to remove and replace the front fog light bulbs on a Peugeot 508. First, move to the side to remove an…
How to reset the Service light on a Peugeot 508
How to reset the Service light on a Peugeot 508
Peugeot 508 (2018-2026 / MK 2) Here’s how to reset the Service light on a 2022 Peugeot 508: the vehicle must be off, with the ignition turned off. Locate the button at the end of t…
How to activate and deactivate the fog lights of the Peugeot 508 2
How to activate and deactivate the fog lights of the Peugeot 508 2
Peugeot 508 (2018-2026 / MK 2) Turning on and off the fog lights on vehicles is a simple operation to perform. On Peugeot 508 2 vehicles, to perform this operation, we must turn on…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos