Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

The steering wheel of the Peugeot 308, how is it removed?

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Steering wheel

The steering wheel is not only disassembled in case of problems, structural breakages, or electrical or mechanical failures inside; it can also be removed to renew the material it is made of, using special cleaning products, and so on. We learn how to remove it from this video tutorial: With a small flathead screwdriver, we pry on the central panel and pull it off. Then, from the rear side holes of the steering wheel, we insert the screwdriver and release the airbag latch, disconnecting the electrical power connector as well. Finally, we unscrew the central pin and remove the steering wheel from the steering column.

Posted on 27 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to Removing the Cabin Fan from the Peugeot 308
Guide to Removing the Cabin Fan from the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Below are the instructions that will allow you to remove and replace the cabin fan in the Peugeot 308. First, get inside the vehicle and begin disass…
Replace Steering Wheel on Peugeot 308
Replace Steering Wheel on Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Remove the steering wheel and airbag from the Peugeot 308 if damaged. Insert the removal keys into the slots at the back of the steering wheel and un…
How do you remove the steering wheel of the Peugeot 308 2?
How do you remove the steering wheel of the Peugeot 308 2?
Peugeot 308 (2013-2021 / T9, MK 2) We analyze the various stages of work, about dismantling the steering wheel of a Peugeot 308 2. It must be said that there are no substantial differe…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos