Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Third Brake Light Bulbs on the Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part:

If any bulbs in the third brake light located on the upper edge of the tailgate are not lighting, you will need to disassemble it to replace them. It is advisable to replace all the bulbs (W5W fitting) and not just the blown ones. Open the rear hatch and remove the plastic cover applied to the rear fascia by simply detaching it. Unscrew the fastening nuts of the third brake light and extract it from its position by pressing on the plastic tab and disconnecting the relevant power connector. At this point, detach the lamp holder and proceed with replacing the bulbs.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Third Brake Light on Peugeot 308 SW
Removing the Third Brake Light on Peugeot 308 SW
Peugeot 308 (2013-2021 / T9, MK 2) In this video tutorial, you will learn how to remove the third brake light on a Peugeot 308 SW by following these simple steps. First, open the boot …
Replacing the Third Brake Light and Lamp of the Peugeot 308
Replacing the Third Brake Light and Lamp of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) In this brief and simple guide, follow the main instructions to remove and replace the third brake light and lamp of the Peugeot 308. First, open the…
How to Replace the Third Brake Light on a Peugeot 308
How to Replace the Third Brake Light on a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Before you start, open the boot of your Peugeot 308. Begin by unfastening and removing the internal cover near the third brake light. Next, unscrew a…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos