Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 308
    4. : How to replace the bulb of the left front fog light of the Peugeot 308.

Peugeot 308 - Video tutorial

Model: Peugeot 308 MK 1, T7 - Years 2007-2014
Part: Light bulb
Operation: How to replace the bulb of the left front fog light of the Peugeot 308.

Replacing the left fog light bulb of the Peugeot 308 is a very simple operation to perform independently. The first thing to do is to remove the cover of the headlight, to do this you just need to extract it by levering with a plastic tool. Once the headlight is removed, we can disconnect the connector and remove the burnt-out bulb. We then proceed by connecting the new bulb to the connector. At this point, we reinsert the headlight into its housing, pushing it inward. We check that the bulb works and proceed in the same way with the right fog light.


Posted on 9 November 2023 by ScegliAuto

    Frequently Asked Questions

    • 308 2007-2014 - How to replace the fog light bulb in the Peugeot 308? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos