Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 308
    4. : How to replace the glove compartment light on a Peugeot 308.

Peugeot 308 - Video tutorial

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Light bulb
Operation: How to replace the glove compartment light on a Peugeot 308.

Let's see how to replace the light in the glove compartment of a Peugeot 308. We can see that on the side of the glove compartment, we have the dome light that no longer works. We lever it to remove the dome light from its housing. We need to be careful because along with the dome light, there is also the button that turns on the light when we open the drawer. It is a "normally open" button, which means it only turns off when the button is pressed. With a small screwdriver, very delicately, we separate the transparent part from the base. We change the bulb, which may not be can-bus as it does not affect the instrument panel lights. Remember not to touch it with bare hands. Now we close the dome light. We put it back in place, paying attention to the positioning of the button, and press it just enough for it to fit snugly, and we're done.


Posted on 28 August 2023 by ScegliAuto

    Frequently Asked Questions

    • 308 2007-2014 - How to replace the fog light bulb in the Peugeot 308? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos