Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Third Brake Light and Lamp of the Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Tail light

See other generations:
Video tutorial

In this brief and simple guide, follow the main instructions to remove and replace the third brake light and lamp of the Peugeot 308. First, open the boot and start by removing the plastic cover located at the top, behind the third brake light; then unclip the clips and disconnect the electrical connector of the bulbs to remove the third brake light, as shown in the video.

Now replace the small bulb-type bulbs or the entire lamp; finally, reassemble everything by applying the reverse procedure!


Updated on 29 May 2026 by ScegliAuto


Related tutorials

How to Replace the Third Brake Light Bulbs on the Peugeot 308
How to Replace the Third Brake Light Bulbs on the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) If any bulbs in the third brake light located on the upper edge of the tailgate are not lighting, you will need to disassemble it to replace them. It…
How to Remove the Third Brake Light of the Peugeot 308
How to Remove the Third Brake Light of the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) This guide shows you how to remove and replace the third brake light (the central one), as well as its bulbs, on the Peugeot 308. First, open the rea…
Removing the Third Brake Light on Peugeot 308 SW
Removing the Third Brake Light on Peugeot 308 SW
Peugeot 308 (2013-2021 / T9, MK 2) In this video tutorial, you will learn how to remove the third brake light on a Peugeot 308 SW by following these simple steps. First, open the boot …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos