Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front headlight of the Peugeot 508

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Headlight

Today we will explain how to remove the front headlight of the 2010 Peugeot 508 independently in order to proceed with the cleaning of the lenses. To remove the headlight, we must first remove the support screws located on the front fender of the left wheel so that we can detach part of the bumper. After detaching the front bumper, we unscrew the upper screws in the headlight and the lower ones. We remove the headlight from its housing and disconnect the connector from the headlight. After removing the headlight, we can proceed with the cleaning of the lenses, and the assembly follows the reverse procedure. The same steps can be performed on other Peugeot vehicles.

Posted on 30 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Wing of the Peugeot 508
How to Replace the Front Wing of the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) This guide provides instructions for removing and replacing the front wing of the Peugeot 508. First, move to the side and start by removing the fron…
How to Replace the Rear Light and Bulb on a Peugeot 508 SW
How to Replace the Rear Light and Bulb on a Peugeot 508 SW
Peugeot 508 (2018-2026 / MK 2) The rear light of the Peugeot 508 is a single unit, and you will need to remove it as a whole to replace either the bulb or other components. To do t…
How to replace the reverse light bulb of the Peugeot 508
How to replace the reverse light bulb of the Peugeot 508
Peugeot 508 (2018-2026 / MK 2) In this new mini guide aimed at those of you who own a second edition Peugeot 508, we will explain how you can quickly and safely replace the reverse…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos