Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb of the Peugeot 508

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Headlight bulb

This tutorial provides instructions to remove and replace the front headlamp bulb of the Peugeot 508. First, open the bonnet of your car and remove the plastic cover protecting the bulbs; then unclip the metal spring and disconnect the electrical connector to remove and replace the dipped beam bulb, as shown in the video. At this point, remove the connector and bulb holder of the position light if you wish to replace it as well; install the new bulbs with the same fitting.

Updated on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the Peugeot 508.
How to replace the headlight bulb of the Peugeot 508.
Peugeot 508 (2010-2018 / MK 1) In this guide, we will look at the main instructions on how to disassemble and replace the low beam headlight bulb of the Peugeot 508. First, let's o…
How to replace the front headlight bulb on the Peugeot 508?
How to replace the front headlight bulb on the Peugeot 508?
Peugeot 508 (2010-2018 / MK 1) To replace the front headlight bulb on the Peugeot 508, open the bonnet to access the components inside the engine bay: specifically, you will need t…
Guide to Replacing the Front Headlight Bulb on the Peugeot 508
Guide to Replacing the Front Headlight Bulb on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) This guide outlines the main steps for removing and replacing the front headlight bulb on the Peugeot 508, following the instructions below. First, o…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos