Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 508
    4. : Headlight bulb

Peugeot 508 - Headlight bulb

Peugeot 508 (2010-2018 / MK 1)
How to replace the bulb of the Peugeot 508.
Today we will explain how to replace the front headlight bulb of the Peugeot 508. We start the replacement by opening the front hood. Then, we unscrew the …read all…
Posted on 3 February 2024 by ScegliAuto
Peugeot 508 (2010-2018 / MK 1)
How to replace the front headlight bulb of the Peugeot 508?
In this tutorial, we will see the instructions that will allow us to disassemble and replace the headlight bulb of the Peugeot 508. First, we open the engine …read all…
Posted on 13 December 2023 by ScegliAuto
Peugeot 508 (2010-2018 / MK 1)
Replacing the headlight bulb with a led one on the Peugeot 508
If we want to replace the headlight bulbs with an equivalent LED model on this car from the French company, we will find instructions on how to behave in the …read all…
Posted on 20 May 2023 by ScegliAuto
Peugeot 508 (2010-2018 / MK 1)
Guide to replacing the Peugeot 508 headlight bulb
Let's see in this guide the main steps that will allow us to remove and replace the Peugeot 508 headlight bulb, following the instructions below. First of all …read all…
Posted on 30 August 2022 by ScegliAuto
Peugeot 508 (2010-2018 / MK 1)
How to replace the headlight bulb on the Peugeot 508?
In order to replace the Peugeot 508 headlight bulb, you need to open the hood, so that you can have access to the components inside the engine compartment: in …read all…
Posted on 30 August 2022 by ScegliAuto
Peugeot 508 (2010-2018 / MK 1)
How to replace the headlight bulbs in Peugeot 508?
In this tutorial we can see how to replace the front Xenon bulbs in the Peugeot 508, a very simple and fast operation. First of all we disconnect the negative …read all…
Posted on 25 April 2024 by ScegliAuto
Peugeot 508 (2010-2018 / MK 1)
Front bulb replacement on Peugeot 508
Raise the hood and unscrew all the screws relating to the upper protection to the bumper, then remove it. For safety, you can disconnect the battery poles and …read all…
Posted on 17 January 2024 by ScegliAuto
Alternator (1) Car stereo (4) Battery (6) Gearbox (7) Key (4) Timing belt (1) -board computer (12) Checks and maintenance (28) Brake discs (1) Side indicator light (1) Headlight (2) Tail light (1) Air filter (2) Cabin air filter (2) Diesel filter (2) Headlight bulb (7) Rear light bulb (1) Handle (2) Window motor (2) Gear oil (1) Engine oil (1) Door panel (9) Front bumper (1) Rear bumper (2) Brake pads (3) Tires (1) Gear Shift Knob (1) Fuel pump (1) Instrument cluster (6) Fuse box (8) Outside rearview mirror (2) Thermostat (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos