Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 508
    4. : Handle

Peugeot 508 - Handle

Peugeot 508 (2010-2018 / MK 1)
How to remove the external door handle on the Peugeot 508
Let's see in this video the procedure to remove and replace the external door handle on the driver's side on the Peugeot 508 first series, in simple steps. …read all…
Posted on 1 March 2024 by ScegliAuto
Peugeot 508 (2010-2018 / MK 1)
Handle replacement on Peugeot 508
How do you remove the handle from inside the door? Let's see how the handle of a Peugeot 508 is removed. We open the car door; we remove the plastic cover …read all…
Posted on 28 December 2023 by ScegliAuto
Alternator (1) Car stereo (4) Battery (6) Gearbox (7) Key (4) Timing belt (1) -board computer (12) Checks and maintenance (28) Brake discs (1) Side indicator light (1) Headlight (2) Tail light (1) Air filter (2) Cabin air filter (2) Diesel filter (2) Headlight bulb (7) Rear light bulb (1) Handle (2) Window motor (2) Gear oil (1) Engine oil (1) Door panel (9) Front bumper (1) Rear bumper (2) Brake pads (3) Tires (1) Gear Shift Knob (1) Fuel pump (1) Instrument cluster (6) Fuse box (8) Outside rearview mirror (2) Thermostat (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos