Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Door Handle on the Peugeot 508

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Handle

In this video, you will see the procedure to remove and replace the external door handle on the driver's side of the first series Peugeot 508 in simple steps. First, open the front door and start by removing the door panel; then disconnect the electrical connector of the lock and unscrew the fixing screw located on the side of the door to remove the lock, as shown in the video. At this point, you can also remove the handle; then replace everything by applying the reverse procedure of disassembly!

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Handle on Peugeot 508
Replacing the Handle on Peugeot 508
Peugeot 508 (2010-2018 / MK 1) How do you remove the handle from inside the door? Here’s how to remove the handle on a Peugeot 508. Open the car door; remove the plastic covering p…
How to remove the external handle of the Peugeot 508 MK1 by removing the inner panel
How to remove the external handle of the Peugeot 508 MK1 by removing the inner panel
Peugeot 508 (2010-2018 / MK 1) In this video we see how to remove the external handle of the Peugeot 508: even if the handle is broken, we cannot completely remove it because it is…
How do you remove the rear door trim panel in the Peugeot 508 SW?
How do you remove the rear door trim panel in the Peugeot 508 SW?
Peugeot 508 (2010-2018 / MK 1) Let's see how to proceed with the disassembly of the door panel of the Peugeot 508 sw. In this video, the work in question is a fundamental step to r…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos