Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 508
    4. : Window motor

Peugeot 508 - Window motor

Peugeot 508 (2010-2018 / MK 1)
Removing the Peugeot 508 window lifter motor
Today we will see how to disassemble the power window motor of a Peugeot 508. First of all we open the door and we go to disassemble its panel: we remove the …read all…
Posted on 11 January 2024 by ScegliAuto
Peugeot 508 (2010-2018 / MK 1)
How to remove the door lifter of the Pegeot 508
To be able to disassemble the glass lifting mechanism of the front door of this car model, you must first remove the door panel: start by unhooking the cover …read all…
Posted on 17 September 2023 by ScegliAuto
Alternator (1) Car stereo (4) Battery (6) Gearbox (7) Key (4) Timing belt (1) -board computer (12) Checks and maintenance (28) Brake discs (1) Side indicator light (1) Headlight (2) Tail light (1) Air filter (2) Cabin air filter (2) Diesel filter (2) Headlight bulb (7) Rear light bulb (1) Handle (2) Window motor (2) Gear oil (1) Engine oil (1) Door panel (9) Front bumper (1) Rear bumper (2) Brake pads (3) Tires (1) Gear Shift Knob (1) Fuel pump (1) Instrument cluster (6) Fuse box (8) Outside rearview mirror (2) Thermostat (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos