Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 508
    4. : Brake rotors

Peugeot 508 - Brake rotors

Brake Rotors Peugeot 508 (2010-2018 / mk 1)

Peugeot 508 (2010-2018 / MK 1)
How to Replace Rear Brake Discs and Pads on a Peugeot 508 SW
Learn how to remove and replace the rear brake discs along with the pads on a Peugeot 508 SW by following these simple steps. First, lift the vehicle at the …Read all…
Posted on 10 May 2026 by ScegliAuto
Cigarette lighter (2) Alternator (1) Car stereo (6) Battery (10) Transmission (7) Key (12) Timing belt (1) Air conditioner (1) Onboard computer (8) Checks and maintenance (29) Dashboard (1) Brake rotors (1) Rear bench seat (1) Side marker light (1) Headlight (4) Tail light (2) Fog lights (2) Diesel particulate filter (1) Air filter (4) Cabin air filter (6) Diesel fuel filter (3) Parking brake (3) Accessory kit (2) Light bulb (1) Headlight bulb (9) Tail light bulb (1) (1) Handle (4) Power window motor (2) Transmission fluid (1) Clock (9) Door trim panel (14) Front bumper (2) Rear bumper (3) Brake pads (3) Tires (1) Shift knob (2) Fuel pump (1) Car door (2) Power window switch (1) Instrument cluster (2) Radiator (3) Heater core (1) Wheel (1) Fuse box (19) Seat (2) Parking sensors (1) Side mirror (6) AdBlue warning light (11) Warning light – error code (16) (7) Tire pressure warning light (5) Service warning light (63) Fuel cap (2) Thermostat (1) Valve (1) Blower motor (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos